EASY INPUT AND QUICK RESULTS FOR VARIOUS TYPES OF COILS

The program has just 3 simple input sheets. COIL DATA,GAS DATA and FLUID DATA. These may be for an existing or a new coil.Once these are entered, click and run and get results as shown below. The example below is for a finned superheater. See the vast amount of information you get regarding the SUPERHEATER such as heat transfer coefficients on gas/steam side, tube/fin temperatures, gas/steam pressure drops,duty, gas velocity,fluid and exit gas temperatures and so on. Quickly change any data and rerun if required. If your plant has a superheater and is not operating  as expected, run using COILS and see how it should perform. You can also change the fouling factors on gas/steam side. Similarly you can check out the economizer,evaporator or boiler bank,tubular air heater an air cooled condenser.